High voltage DC motorYour position:The home page

Z710 type straight motor is our newly developed Z series DC motor, the central 710 mm high, due to the structure and properties of Z710 type motor is unique, there is some difference between the medium and Z series DC motor.
The motor frame by polygonal laminations, has the advantages of small volume, light weight, suitable for silicon controlled rectifier power supply, the motor insulation class F solventless varnish, vacuum pressure impregnation treatment using motor (VPI), the winding insulation has good moisture resistance capability, mechanical strength and excellent thermal conductivity, armature core made of silicon steel sheets which are stacked together, with good permeability properties, motor with rolling bearing, stable operation.
Mounting the motor in accordance with GB997 and IEC34-7 "motor structure and installation form code"
standard IM1001? end cover bearing, foot mounting, horizontal cylindrical single shaft extension,
can be derived with IM1002 cover type bearing, foot mounting, horizontal, cylindrical shaft
motor protection grade according to GB4942.1 and IEC34-5 "the motor shell protection grade" standard, shell protection grade standard motor has IP22 and IP44 two, motor cooling method based on GB1993 and IEC34-6 "motor cooling method" standard, the standard motor with IC17, IC37 and ICW37A86 three.The standard form of the cooling air entrance in the motor drive end (non commutator end).
if you need other protection grade, cooling mode can be further consultations.